SPONSORS
2024 ICRBE EXPO |
Marbling on top guide wrap/glow in dark pigment
Posted by:
Justin Quick
(---.lightspeed.wpbhfl.sbcglobal.net)
Date: April 23, 2018 06:56PM
Hi, I was wondering if anyone has tried to marble the top guide wrap. I do a lot of fishing at night and want to give glow in the dark pigment and thread a try. I have never tried these threads or the pigment a try, I have also it seen anyone marble with it on guide wrap so I’m thinking of trying it out. Any suggestions? Tips? Dos and donts? Is the widely available glow powder pigment reliable? Thanks in advance. Re: Marbling on top guide wrap/glow in dark pigment
Posted by:
Justin_Benjamin
(104.129.196.---)
Date: April 23, 2018 10:26PM
Justin,
Just a quick note on the epoxy/glow pigment thought. I have used a LOT of the glow pigment mixed into epoxy on jig heads. I would say that it will work, but, you will want to purchase the brightest glow powder you can (sorry it's been a few years and can't remember whom I bought it from). Also, make sure that you mix a lot of pigment into the epoxy, otherwise your "light" will be short lived and cumbersome. One thing you could trial is putting some of the super glow Component Systems (CS) vinyl lure paint on top of a trial guide that is already epoxied on. I just don't know if the epoxy will react with the vinyl paints, I know the vinyl paint can not be put over powder paints. Anyways, just thought I would throw out some similar experiences I have had with other fishing items. Good Luck Re: Marbling on top guide wrap/glow in dark pigment
Posted by:
Steve Gardner
(---.nc.res.rr.com)
Date: April 24, 2018 07:29AM
Justin
I fish a lot of tournaments at night and have used both glow in the dark threads and glow pigments. both work with descent results. but with short lived glowing Have experienced much better results by using glow in the pigments over glow in the dark threads. The glow lasts much longer. As the second Justin mentioned use a lot of a high quality pigment. Have not done any marbling Re: Marbling on top guide wrap/glow in dark pigment
Posted by:
Mud Hole Custom Tackle
(---.se.biz.rr.com)
Date: April 24, 2018 12:05PM
Something you may want to try is ProWrap's GloWrap found here:
[www.mudhole.com] On the pigment side - the yellow CRB is pretty bright [www.mudhole.com] Regards. Team Mud Hole Custom Tackle Web: [www.mudhole.com] Email: sales@mudhole.com Toll Free Phone #: 1-866-790-RODS (7637) Stay Connected with us: FaceBook: [www.facebook.com] YouTube: [www.youtube.com] Instagram: [www.instagram.com] Tik Tok: Tik Tok: [www.tiktok.com] Twitter: @mudholetackle Edited 1 time(s). Last edit at 04/24/2018 12:06PM by Mud Hole Custom Tackle. Re: Marbling on top guide wrap/glow in dark pigment
Posted by:
Jay Dubay
(---.clv.wideopenwest.com)
Date: April 25, 2018 03:31AM
I tape on a mini glow stick for anchor or shore fishing. If I'm casting in the boat, Have an extra reel spool loaded with florescent line, And flip on the Black LED Lights Sorry, only registered users may post in this forum.
|