SPONSORS
2024 ICRBE EXPO |
Deep cranking blank?
Posted by:
James Ruggerio
(---.hsd1.va.comcast.net)
Date: February 21, 2018 09:07PM
I am building a rod for deep cranking-20ft plus and would appreciate suggestions please. I have been considering the MHX CB 906 / CB907 or the CB928? I am a bit concerned the 928 may be a bit too heavy? Has anyone built on this one?
Any other suggestions? I plan to go to the expo and am hopeful to see these there as well as others. Re: Deep cranking blank?
Posted by:
Steve Monroe
(---.kya.res.rr.com)
Date: February 21, 2018 10:16PM
There are a lot of good options from several manufactures. Phenix makes a really good blank for this application.
[www.mudhole.com] I have built on the Phenix,MHX, St. Croix, Bushido, and Rainshadow. They have all performed well. Re: Deep cranking blank?
Posted by:
chris adams
(---.se.biz.rr.com)
Date: February 22, 2018 11:00AM
The CB928 and CB968 were specifically designed for the 10XD in mind. Honestly the CB907 will still handle it as it has incredible versatility to not only fish up but also down in crankbait sizes. Most anglers who want a dedicated 20+ footer rod use one of the CB 8 powers, those who throw a 20+ a little but fish 8XD-6XD much more tend to go with the CB907. Re: Deep cranking blank?
Posted by:
Arthur J Moody
(---.dsl.rtmc.net)
Date: February 22, 2018 03:56PM
James,
Point blank 761MF. This might be an option for you. Re: Deep cranking blank?
Posted by:
James Ruggerio
(---.hsd1.va.comcast.net)
Date: February 22, 2018 10:20PM
Appreciate the assistance and suggestions on this !
Thank you! Re: Deep cranking blank?
Posted by:
James Taylor
(---.wavecable.com)
Date: February 23, 2018 11:09AM
For our high-end RainShadow we'd recommend The Judge JDGCB710H (Made in USA) blank - [www.rainshadowrodblanks.com]
You can also go with the Revelation Crankbait REVCB80H - [www.rainshadowrodblanks.com] James Taylor Batson Enterprises BatsonEnterprises.com | RainShadowRodBlanks.com | ALPSForeCast.com | Build2Fish.com Re: Deep cranking blank?
Posted by:
James Ruggerio
(---.hsd1.va.comcast.net)
Date: February 23, 2018 05:18PM
Thank you! I will look at these as well.
James Re: Deep cranking blank?
Posted by:
David Miller
(---.pools.spcsdns.net)
Date: February 26, 2018 10:05AM
Which one did you like after flexing some at the expo? Re: Deep cranking blank?
Posted by:
James Ruggerio
(---.hsd1.va.comcast.net)
Date: March 04, 2018 11:12PM
Actually went with the 907 and once completed will determine if something else is needed for the 10xd's Sorry, only registered users may post in this forum.
|