I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

eva for turning on lathe
Posted by: Reemberto Alvarez (---.nwrknj.fios.verizon.net)
Date: January 02, 2018 02:27PM

Good afternoon, can some tell me where to buy eva blocks for turning on the lathe.Thank you

Options: ReplyQuote
Re: eva for turning on lathe
Posted by: David Baylor (---.neo.res.rr.com)
Date: January 02, 2018 04:39PM

Mud Hole sells 18" long square blocks that have a .375 hole bored in them. Interestingly they don't list their outside dimensions in the online catalog. Colors are kind of limited, but they do sell them.

Options: ReplyQuote
Re: eva for turning on lathe
Posted by: Spencer Phipps (---.hsd1.or.comcast.net)
Date: January 02, 2018 06:41PM

Your e-mail is hidden, some places are not sponsors, so I won't mention them here.

Options: ReplyQuote
Re: eva for turning on lathe
Posted by: Harry Kelly (---.dyn.optonline.net)
Date: January 03, 2018 08:08AM

Billy Vivona...has blocks also

Options: ReplyQuote
Re: eva for turning on lathe
Posted by: Mud Hole Custom Tackle (---.se.biz.rr.com)
Date: January 05, 2018 10:30AM

Hi Everyone
We actually sell EVA blocks here:
[www.mudhole.com]

Thank David for pointing out we didn't mention the width - the block is 18" x 2" x 2" and we have also updated our website.

We actually have an entire grip making category also - found here:
[www.mudhole.com]

Regards.
Team Mud Hole Custom Tackle
Web: [www.mudhole.com]
Email: sales@mudhole.com
Toll Free Phone #: 1-866-790-RODS (7637)

Stay Connected with us:
FaceBook: [www.facebook.com]
YouTube: [www.youtube.com]
Instagram: [www.instagram.com]
Tik Tok: Tik Tok: [www.tiktok.com]
Twitter: @mudholetackle

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster