SPONSORS
2024 ICRBE EXPO |
glitter to permagloss
Posted by:
nick saselu
(---.dyn.optonline.net)
Date: June 26, 2017 09:31PM
has anyone added glitter to permagloss Re: glitter to permagloss
Posted by:
Tom Kirkman
(Moderator)
Date: June 26, 2017 10:29PM
It can be done but is difficult because PG is very thin. It won't hide the glitter particles within a layer of itself as epoxy does.
................. Re: glitter to permagloss
Posted by:
Tom Wewerka
(---.bltmmd.fios.verizon.net)
Date: June 27, 2017 06:00PM
Nick why not try it on a scrap piece of blank. There are some glitters out there that are extremely small particles and that would be key, it may work. You are surly going to need to apply several coats over it. Good luck and let us know how you made out.
Tom Re: glitter to permagloss
Posted by:
Lynn Behler
(---.97.252.156.res-cmts.leh.ptd.net)
Date: June 28, 2017 09:45PM
It may also be too hot for some glitters. Always test. Re: glitter to permagloss
Posted by:
Rick Provencher
(---.phnx.qwest.net)
Date: July 02, 2017 04:49PM
I am using holograpic glitter in LS Supreme. I have .008 size and I bought a five size kit. It only takes a very small amount and it looks awesome.I have done 3 layer samples with each top layer a smaller sized glitter. Gives a great 3D look.
Rick Sorry, only registered users may post in this forum.
|