SPONSORS
2024 ICRBE EXPO |
#20 Braced carbide guides
Posted by:
Richard Kline
(---.dyn.optonline.net)
Date: February 07, 2017 04:41PM
Repairing a couple of factory wire trolling rods with braced carbide guides I have to replace a couple of size #20 braced carbide guides, the sponsors only have up to size #18 braced guides. does any builders know where I can get a couple of #20 braced carbide guides.If any are still out there.
Thank !!!! Rich Kline Customs Rods Rich Kline CR Re: #20 Braced carbide guides
Posted by:
Don @ American Tackle
(---.biz.bhn.net)
Date: February 08, 2017 08:42AM
We have them up to size 18 _______________________________ God Bless, Don Morse 800-516-1750 ext. 1207 / don@americantackle.us Rod Building..... It's What We Do. Re: #20 Braced carbide guides
Posted by:
Robert A. Guist
(---.dhcp.embarqhsd.net)
Date: February 08, 2017 10:12AM
Hello All.
How about a picture? I have a bunch of old stock guides but "#20 braced carbide guide" is not much to go on. Tight Wraps & Tighter Lines. Bob, New Bern, NC. Re: #20 Braced carbide guides
Posted by:
James Taylor
(---.wavecable.com)
Date: February 08, 2017 10:34AM
We have a size 20 braced carbide guide.
ALPS CWB - [alpsforecast.com] ForCast HCB - [alpsforecast.com] Anyone of our dealers can get them for you, may just have to call them up as it might not be kept in stock by them. James Taylor Batson Enterprises BatsonEnterprises.com | RainShadowRodBlanks.com | ALPSForeCast.com | Build2Fish.com Re: #20 Braced carbide guides
Posted by:
Robert A. Guist
(---.dhcp.embarqhsd.net)
Date: February 08, 2017 02:17PM
Hello Richard.
If your guide is like the Alps or the Forecast James is showing, the nearest thing I have is more like the Pacific Bay XBG and Jann's carries them (The ones I have are Non Braced in a 22 and 24), so good luck in finding what you need. Tight Wraps & Tighter Lines. Bob, New Bern, NC. Re: #20 Braced carbide guides
Posted by:
Richard Kline
(---.dyn.optonline.net)
Date: February 08, 2017 02:36PM
Bob:
They appear to resemble Pac Bay Model CSBB Carbide Boat guides, Pac Bay only makes up to size #18, the rods I am repairing are Tsunami Trophy Series Wire trolling rods and are not a custom built rods. Thanks for the come back ! Rich Kline Custom Rods Re: #20 Braced carbide guides
Posted by:
Robert A. Guist
(---.dhcp.embarqhsd.net)
Date: February 09, 2017 10:25AM
Hello Richard.
I'm not sure but I "think" that they must have been a one off for Tsunami so no one can copy their rods but Utmost has the Alps CWBBG-20's, you could look at one and see if that might work. Let us know what (if anything) you find or do please. Thank You. Tight Wraps & Tighter Lines. Bob, New Bern, NC. Sorry, only registered users may post in this forum.
|