I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

The Elliott SJ 6'10" ML XF Blank
Posted by: Pete Riola- Getrodblanks.com (---.hsd1.mn.comcast.net)
Date: July 14, 2016 10:39AM

Both my son and I have enjoyed fishing the Elliott SJ 610 ML XF [getrodblanks.com] extensively this season using it mostly as a jigging rod. I have caught fish ranging from less than a pound to pike over 40 inches. I can't say enough about this rod blank. It's got the speed, power and response that a fella needs from his main jigging stick. Built up with a 13” Syncork Tennesee handle and SeaGuide TIYGSLSG Titanium Frame guides with Zirconia rings it weighs in at 3.15 ounces, we have another built up with the same handle configuration using SeaGuide EUOSDG-1 single foot Stainless Steel guides comes to the scale at just 3.20 ounces, both rod versions are incredibly light weight and sensitive in the hand and an absolute pleasure to fish with.

Last week in canoe country I used the Elliott 6' 10” to pitch Zara Puppies at shallow water targets for smallmouth bass. The 6' 10' allowed me to cast far and accurately and work the walk-the- dog Zara Puppy from water level with ease, which can often be a difficult lure to work. During the same trip my son Sam was crushing me catching walleye after walleye on a drop shot rig. I re-rigged (if that's a word) the 6' 10” with a drop shot rig and like magic the bite was on! The walleye we were on just simply preferred the bait a foot or so off the bottom and a fairy still presentation. Just goes to show that an old dog can learn new tricks, I hadn’t ever drop shot walleye’s before - it can be deadly!

To see this rod in action check out these videos on the Elliott 6"10" in action:

[getrodblanks.com]
[getrodblanks.com]

Pete Riola
High performance blanks by Gregg Thorne
[getrodblanks.com]
pete@getrodblanks.com



Edited 11 time(s). Last edit at 07/14/2016 11:12AM by Pete Riola- Getrodblanks.com.

Options: ReplyQuote
Re: The Elliott SJ 6'10" ML XF Blank
Posted by: Gary Kilmartin (---.sub-70-194-69.myvzw.com)
Date: July 23, 2016 12:44PM

I have that blank almost finished. Just need to apply a final finish coat to the long wraps, and apply some Tru Oil to the cork. I'll be fishing it next week on the White River, so I can tell you what it's like on the water.

It is a very nice blank for the price. Clean, nicely smooth, very straight, and very light in weight. Feels very crisp in hand.

My only complaint, and this is truly picking one's nit; is the decal. It is way too big. I cut it into four pieces to apply.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster