SPONSORS
2024 ICRBE EXPO |
uneven epoxy over tiger base
Posted by:
Randy Weakley
(---.mycingular.net)
Date: April 18, 2016 07:38PM
Hello, I just put the first coat of epoxy onto my first ever tiger wrap. I did a bit of a thin coat (maybe too thin) and it dried a bit uneven. The wrap I did next to it where I will put a decal is nice and level, as in light reflected off it is a nice straight line. I think maybe I didn't put a thick enough coat on the tiger. Will I be able to remedy this with subsequent coats before wrapping the top wrap? Or will it exacerbate the problem? Re: uneven epoxy over tiger base
Posted by:
Steve Mcleod
(---.88.244.87.dyn.jtglobal.com)
Date: April 18, 2016 08:32PM
No, should be fine with a couple more thicker coats on. Jersey, Channel Islands. (U.K.) Sorry, only registered users may post in this forum.
|