SPONSORS
2024 ICRBE EXPO |
Large Spool Tool
Posted by:
Barry Thomas Sr
(---.hsd1.nj.comcast.net)
Date: April 03, 2016 03:06PM
Roger Wilson posted this Photo as a tool to Load 1 OZ spools from larger spools So I built my own> Needed to respool some Thread.
[www.rodbuilding.org] My build on the Above tool,Works Very Well! Using a 1/4" bolt and my Drill. That short piece of Rod tip is the thread Guide. [www.rodbuilding.org] Edited 3 time(s). Last edit at 04/03/2016 03:50PM by Barry Thomas Sr. Re: Large Spool Tool
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: April 03, 2016 03:43PM
Barry,
I took the picture of the first photo. I use the large spool with the thread guide directly for wrapping rods. I have a stand a lone thread tension device, so that I come off the large spool, through the guides to the tension device and onto the rod. Be safe Re: Large Spool Tool
Posted by:
Barry Thomas Sr
(---.hsd1.nj.comcast.net)
Date: April 03, 2016 03:50PM
I am just refilling 1 oz Spools Sorry, only registered users may post in this forum.
|