SPONSORS
2024 ICRBE EXPO |
WTB: power wrapper
Posted by:
Jason Barnette
(---.hfc.comcastbusiness.net)
Date: March 01, 2016 12:13PM
Hi guys, I am looking to buy a power wrapper if anyone is looking to sell theirs. If you have one or know some that does please let me know.
Thanks, Jason Re: WTB: power wrapper
Posted by:
Spencer Phipps
(---.tmodns.net)
Date: March 01, 2016 12:34PM
Jason,
Have you looked in the Buy/Sell section? They're in there. Re: WTB: power wrapper
Posted by:
Thomas Kaufmann
(---.direcway.com)
Date: March 01, 2016 02:04PM
Steve Gardner just listed one below. You could not ask to deal with a better person.
Tom Re: WTB: power wrapper
Posted by:
Jason Barnette
(---.hfc.comcastbusiness.net)
Date: March 01, 2016 02:09PM
Spencer,
I have tried contacting one guy multiple times through the buy/sell section but I keep getting an email back saying the message failed to send. Re: WTB: power wrapper
Posted by:
Jason Barnette
(---.hfc.comcastbusiness.net)
Date: March 01, 2016 02:11PM
Tom,
Steve is the guy who I have tried to message through the buy/sell section. I looked at his profile and sent him a message to his email Re: WTB: power wrapper
Posted by:
Thomas Kaufmann
(---.direcway.com)
Date: March 01, 2016 04:33PM
Jason, he is a pretty busy guy but I am sure that he will get back in touch with you soon. Don't loose hope.
Tom Re: WTB: power wrapper
Posted by:
Tom Kirkman
(Moderator)
Date: March 01, 2016 06:39PM
Steve has a new computer and was having some issues with his email settings.
................. Re: WTB: power wrapper
Posted by:
Tim I. Johnson
(---.dsl.dytnoh.ameritech.net)
Date: March 01, 2016 08:23PM
I too have been trying to contact Steve regarding advice on a spiral wrap with no luck, must be still having issues with email. When I have tech issues I just find someone 1/2-1/3 my age. (not meant to be a comment on Mr. Gardners age or technical aptitude, but mine) Edited 1 time(s). Last edit at 03/02/2016 08:44AM by Tim I. Johnson. Re: WTB: power wrapper
Posted by:
Steve Gardner
(---.nc.res.rr.com)
Date: March 02, 2016 06:23PM
Jason and Tim
Not ignoring you computer challenged have my C.tech man working on issue, but as of yet not solved. I will contact you as soon as possible. Re: WTB: power wrapper
Posted by:
Tim I. Johnson
(---.dsl.dytnoh.ameritech.net)
Date: March 03, 2016 09:08AM
No worries Steve, I'm still trying to get my VCR to display the correct time since the time change last fall Re: WTB: power wrapper
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: March 03, 2016 05:28PM
Tim,
The simple repair for your VCR is tape. Take a piece of black tape and cover the display on the VCR. You will never have to worry about setting the time again. Be safe Re: WTB: power wrapper
Posted by:
Tim I. Johnson
(---.dsl.dytnoh.ameritech.net)
Date: March 05, 2016 06:56AM
Roger,
LOL, You always have great tips, I took a different route and solved my problem with a little gas and a Bic, going to upgrade if I can find the Bell & Howell 8mm projector in the attic.( VHS with does work with that right?) Sorry, only registered users may post in this forum.
|