SPONSORS
2024 ICRBE EXPO |
Winn grip + American Tackle Aero
Posted by:
rick payne
(---.gtekcommunications.com)
Date: January 23, 2016 09:34PM
Can I cut down the Winn grip straight taper to fit the size 16 Aero with out destroying the Winn grip.
Thanks in advance rp Re: Winn grip + American Tackle Aero
Posted by:
Spencer Phipps
(---.hsd1.or.comcast.net)
Date: January 23, 2016 10:43PM
Not really, the 17mm size works great and I think is more comfortable, even for my small hands. Re: Winn grip + American Tackle Aero
Posted by:
Ron Weber
(---.ph.ph.cox.net)
Date: January 23, 2016 11:10PM
Sure can, I have done it many times Ron Weber Re: Winn grip + American Tackle Aero
Posted by:
Tom Wewerka
(---.bltmmd.fios.verizon.net)
Date: January 23, 2016 11:30PM
Absolutely you can cut it down . It will fit the 16 Aero with no problem. You might want to get the longer grip so when you ct there is still sufficient length . I use a long very sharp Stanley razor knife. Works like a champ
Tom Re: Winn grip + American Tackle Aero
Posted by:
Ron Weber
(---.ph.ph.cox.net)
Date: January 23, 2016 11:38PM
I only cut off the front recess, and find I am able to tuck it into the seat
[www.rodbuilding.org] [www.rodbuilding.org] Ron Weber Edited 2 time(s). Last edit at 01/23/2016 11:51PM by Ron Weber. Re: Winn grip + American Tackle Aero
Posted by:
rick payne
(---.gtekcommunications.com)
Date: January 24, 2016 08:29AM
Thanks guys, I can now continue! Ron, those look good. Thanks for posting the pictures.
rp Sorry, only registered users may post in this forum.
|