I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Batson build sheet
Posted by: roger wilson (---.hsd1.mn.comcast.net)
Date: January 22, 2016 05:49PM

I was building a new rod on one of the new Batson blanks and was having some thoughts and questions about components. I contacted Batson and Kerry sent me the build sheet for that particular blank.

The build sheet gives a very good starting point for components and it also gives important blank diameter sizes needed for reel seat and tip selection.

If you have questions, drop them a line and the response is excellent.

Options: ReplyQuote
Re: Batson build sheet
Posted by: Phil Erickson (---.dsl.pltn13.sbcglobal.net)
Date: January 22, 2016 11:26PM

Many of the Batson build sheets are available on their web site.

Options: ReplyQuote
Re: Batson build sheet
Posted by: Barry Thomas Sr (---.hsd1.nj.comcast.net)
Date: January 26, 2016 01:47AM

roger; sent karry a email with my blank info and he could not find it! sent him a picture of the build label ,he looked in the corners and found it under the dust. seemed surprised that it was that old

Thank You!

Karry Batson <[email protected]>
7:00 PM (6 hours ago)

to me
O wow that’s from way back.

Try something like this.



Edited 1 time(s). Last edit at 01/26/2016 01:49AM by Barry Thomas Sr.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster