SPONSORS
2024 ICRBE EXPO |
Metallic under wrap
Posted by:
Doug Schreiber
(---.lightspeed.oshkwi.sbcglobal.net)
Date: January 16, 2016 10:26PM
I am building a travel rod for sailfish, dorado, that type of thing.
Doing an under wrap with silver metallic under wrap. Not sure if I am going to use Metallic blue or color fast blue over the top. Would you you use a Cp or an epoxy on the under wrap before wrapping the guides? Thanks, Doug See you on the water, Doug Captain Paddlefoot Re: Metallic under wrap
Posted by:
Capt. Michael Harmon
(---.dyn.optonline.net)
Date: January 16, 2016 11:05PM
I've coated under wraps two ways. I always use metallic under wraps so I coat with three coats of perma gloss then place guides and wrap or I do a coat of perma gloss then a coat of epoxy then wrap guides. I avoid metallic blue thread due to fading issues. Good luck MH Re: Metallic under wrap
Posted by:
Randy Weakley
(---.mycingular.net)
Date: January 18, 2016 02:00PM
I'm no expert, but from what I've been able to gather, metallic thread is not well suited for guide wraps. Better for undereraps, trim or inlays. Re: Metallic under wrap
Posted by:
sherman church
(---.hsd1.nh.comcast.net)
Date: January 19, 2016 08:45PM
Randy Weakley Wrote:
------------------------------------------------------- > I'm no expert, but from what I've been able to > gather, metallic thread is not well suited for > guide wraps. Better for undereraps, trim or > inlays. why? I have only built 3 rods now but I used metallic only on one of the builds. Should I be worried? Re: Metallic under wrap
Posted by:
Chris Herrera
(---.sub-70-210-151.myvzw.com)
Date: January 21, 2016 08:40PM
I can't speak for all brands, but I have used metallic for guide wraps on several rods, the oldest having been built in 2005, and I have not had any issues. I used Gudebrod, and the rods range from a 7 weight fly rod to med heavy bass rods.
Take care, Chris Sorry, only registered users may post in this forum.
|