SPONSORS
2024 ICRBE EXPO |
For Adam Lathrop (pink tiger)
Posted by:
Lynn Behler
(---.102.204.190.res-cmts.t132.ptd.net)
Date: November 21, 2015 04:10PM
Adam, Have you had any luck with the tiger wrap you posted about on 11/12? Lynn Re: For Adam Lathrop (pink tiger)
Posted by:
Adam Lathrop
(---.hsd1.tx.comcast.net)
Date: November 22, 2015 12:29PM
I did indeed. I used pink and silver as my base with black on top. It was darker then i would like but I learned that if i want it lighter i should have gone black and silver on bottom with pink on top Re: For Adam Lathrop (pink tiger)
Posted by:
Chris Herrera
(---.sub-70-199-137.myvzw.com)
Date: November 22, 2015 03:02PM
And here I thought "Pink tiger" was your nickname.....lol.
Chris Re: For Adam Lathrop (pink tiger)
Posted by:
Lynn Behler
(---.102.204.190.res-cmts.t132.ptd.net)
Date: November 22, 2015 04:44PM
That's a pretty good one Chris! Lynn Re: For Adam Lathrop (pink tiger)
Posted by:
Adam Lathrop
(---.hsd1.tx.comcast.net)
Date: November 22, 2015 10:14PM
Well played sir well played.
I threw some pics on a local fishing website if ya want to see what a pink/silver base, black top tiger looks like. [2coolfishing.com] Re: For Adam Lathrop (pink tiger)
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: November 23, 2015 10:29AM
Would not white somewhere in it lighten it up Bill - willierods.com Re: For Adam Lathrop (pink tiger)
Posted by:
Adam Lathrop
(141.197.12.---)
Date: November 23, 2015 10:57AM
there was silver in the base. Re: For Adam Lathrop (pink tiger)
Posted by:
Lynn Behler
(---.102.204.190.res-cmts.t132.ptd.net)
Date: November 23, 2015 01:29PM
Adam, It may not have turned out as pink as you would have liked, but it sure looks like you nailed the burnishing. Gotta love those blanks also. Lynn Re: For Adam Lathrop (pink tiger)
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: November 23, 2015 03:06PM
With black on top would that not make it darken ?? Bill - willierods.com Re: For Adam Lathrop (pink tiger)
Posted by:
Lynn Behler
(---.102.204.190.res-cmts.t132.ptd.net)
Date: November 23, 2015 05:42PM
Adam, In your original post you asked "what should I use instead to give me both movement and...." this led me to assume that you intended to strip the top layer and start again. Which you could have done. Either way the result is a success. Lynn Sorry, only registered users may post in this forum.
|