SPONSORS
2024 ICRBE EXPO |
CTS Blanks
Posted by:
Terry Morrell
(---.lightspeed.tulsok.sbcglobal.net)
Date: September 10, 2015 10:27PM
I've been out of the rod building for several years and I'm thinking about getting started again. I know things have changed over the years. My question is CTS still still top of the line in blanks or are there others? I use to build on CTS and a few Rainshadow also.
Thanks Terry Re: CTS Blanks
Posted by:
Bill Hickey
(---.nycap.res.rr.com)
Date: September 11, 2015 09:37AM
CTS is still a top of the line blank manufacturer, I build on their Fly Rod blanks, both Carbon Fiber and Fiberglass, in my opinion their Carbon blanks are the best compared to other companies. Their Fiberglass is equal to a couple of other small fiberglass blank manufacturers. Re: CTS Blanks
Posted by:
Terry Morrell
(---.lightspeed.tulsok.sbcglobal.net)
Date: September 11, 2015 10:20AM
Thanks Bill Re: CTS Blanks
Posted by:
Donald R Campbell
(---.lsanca.fios.verizon.net)
Date: September 11, 2015 01:14PM
Terry,
Since you are familiar with the quality of the previous Rainshadow line of Blanks, you will really be impressed with the Rainshadow Eternity 2 and Immortal Blanks. Check them out through Utmost and by the way, Utmost has the best shipping rates I have found in the industry. They only charge their direct shipping costs, no handling charge! Don Campbell don@sensorfishingrods.com Re: CTS Blanks
Posted by:
Herb Ladenheim
(---.lightspeed.wepbfl.sbcglobal.net)
Date: September 16, 2015 07:04PM
Terry,
I sent you an email to address of record here. Just want to make sure you received it. Regards, Herb Sorry, only registered users may post in this forum.
|