SPONSORS
2024 ICRBE EXPO |
Carbon tube size for ALPS MVT and Textouch
Posted by:
Mattias Svensson
(---.ovanaker.se)
Date: August 10, 2015 06:58AM
If I'm about to put a carbon tube on my rod blank and then the ALPS MVT reel seat or a textouch mounted to that tube, what size on the tube should I get and what size for the reel seat for the tube to fit both in the back of the reel seat (where the 2 smaller cutout are) and in the middle where the big cutout are for blank exposure? Re: Carbon tube size for ALPS MVT and Textouch
Posted by:
Mattias Svensson
(---.ias.bredband.telia.com)
Date: August 10, 2015 10:48AM
Or to put it in other words, if I want to replace the carbon insert in the back of the reel seat with my own carbon tube, whats the inside diameter of that part of the reel seat? Re: Carbon tube size for ALPS MVT and Textouch
Posted by:
Tom Kirkman
(Moderator)
Date: August 10, 2015 10:52AM
You might email ALPs or Batson Enterprises and have them measurement that part for you.
................. Re: Carbon tube size for ALPS MVT and Textouch
Posted by:
Ryan McBride
(---.wavecable.com)
Date: August 10, 2015 02:21PM
You can call into the main line and any sales staff can help you out: 877-875-2381 R. McBride Batson Enterprises BatsonEnterprises.com | RainShadowRodBlanks.com | ALPSForeCast.com | Build2Fish.com Re: Carbon tube size for ALPS MVT and Textouch
Posted by:
Geoff Staples
(---.wavecable.com)
Date: August 10, 2015 07:00PM
Mr. Svensson,
The I.D. at the back of that seat is 15.05mm. I hope this helps out. Thanks. -The Batson TEAM BatsonEnterprises.com Re: Carbon tube size for ALPS MVT and Textouch
Posted by:
Mattias Svensson
(---.ias.bredband.telia.com)
Date: August 10, 2015 11:43PM
Thank you very much! Re: Carbon tube size for ALPS MVT and Textouch
Posted by:
Tom Wewerka
(---.bltmmd.fios.verizon.net)
Date: August 12, 2015 11:51AM
Matt the ALPS MVT seats in 14, 14.5 and 15 mm do NOT have the carbon insert. If you can get a tube that size all you will need to do is slide it on and mount to the rod blank.
Tom Sorry, only registered users may post in this forum.
|