SPONSORS
2024 ICRBE EXPO |
adhesive for cork-wood-eva grip
Posted by:
Aaron Erwine
(---.hostome.com)
Date: July 20, 2015 04:20PM
Going to use all three things, cork-wood-eva in a grip combination. will two part epoxy work or do I need to do something special on the pieces where I will be gluing in the eva? Also to mount to rod blank, I assume two part epoxy will adhere them all? Re: adhesive for cork-wood-eva grip
Posted by:
Don @ American Tackle
(---.se.biz.rr.com)
Date: July 20, 2015 04:33PM
Pro-Paste! _______________________________ God Bless, Don Morse 800-516-1750 ext. 1207 / don@americantackle.us Rod Building..... It's What We Do. Re: adhesive for cork-wood-eva grip
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: July 21, 2015 12:54AM
Two part epoxy will work fine for all of the different materials.
Be safe Re: adhesive for cork-wood-eva grip
Posted by:
Mark Blabaum
(---.dsl.mhtc.net)
Date: July 22, 2015 02:01PM
Aaron, are you butting any of the eva together, or is it going to be used between the wood and cork? The reason I ask is epoxies will leave EVA with a hard glue line and it can seem almost like a metal edge in between the EVA. If you are butting EVA together you should use a contact adhesive, if you are using the EVA between the cork and wood you should be able to use an epoxy or urethane glue with out issue. Sorry, only registered users may post in this forum.
|