I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Looking for a Trim Ring
Posted by: Andrew Clark (---.ks.ks.cox.net)
Date: June 17, 2015 04:27PM

Where can I get a cobalt blue Trim ring that will fit between the rear handle and the reel seat? Thanks.

Options: ReplyQuote
Re: Looking for a Trim Ring
Posted by: Ron Schneider (---.mthmcmta01.res.dyn.suddenlink.net)
Date: June 17, 2015 04:42PM

If it is a Spin in sz 16, we have them.

Best wishes,
Ron Schneider
Schneider's Rod Shop
Mountain Home, Arkansas
[www.schneidersrods.com]
mtnron40@yahoo.com
870-424-3381

Options: ReplyQuote
Re: Looking for a Trim Ring
Posted by: Andrew Clark (---.ks.ks.cox.net)
Date: June 17, 2015 04:46PM

It's for a casting seat. The alps mvt toray seat. I found one at angler's workshop. Thanks.

Options: ReplyQuote
Re: Looking for a Trim Ring
Posted by: Bill Sidney (---.gci.net)
Date: June 17, 2015 04:49PM

what size ??????????? Mud hole has trim rings BLUE 7 MM to 16 MM some of the other JOBBERS should have them ASK them

William Sidney
AK



Edited 1 time(s). Last edit at 06/17/2015 04:51PM by william G Sidney.

Options: ReplyQuote
Re: Looking for a Trim Ring
Posted by: Andrew Clark (---.ks.ks.cox.net)
Date: June 17, 2015 04:59PM

The reel seat is a 16. I'm not looking for just any trim ring. I need one to fit between the bottom of the casting seat and the top of the rear handle without covering the tenon completely.

Options: ReplyQuote
Re: Looking for a Trim Ring
Posted by: Thomas Kaufmann (---.direcpc.com)
Date: June 17, 2015 06:14PM

[alpsforecast.com]

Look here and then contact your favorite Batson dealer.

Options: ReplyQuote
Re: Looking for a Trim Ring
Posted by: Andrew Clark (---.ks.ks.cox.net)
Date: June 17, 2015 07:47PM

Thomas Kaufmann Wrote:
-------------------------------------------------------
> [alpsforecast.com]
> g-checks-trim-rings/alps-trc-trim-rings-aluminum/
>
> Look here and then contact your favorite Batson
> dealer.


Yep. I found one on angler's workshop. It is made by Alps.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster