I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Pages: Previous12
Current Page: 2 of 2
Re: RodMaker Magazine
Posted by: Scott Gamble (---.dyn.iinet.net.au)
Date: May 03, 2015 10:32PM

Barry Chapman Wrote:
-------------------------------------------------------
> Scott if you contact Ian Miller at Miller custom
> Rods they will be able to set you up with a
> subscription www.millerods.com

Hi Barry,

I have done tried this a few times and never received a reply to emails sent. I will try again.

Cheers

SG Custom Rods
Australia



Edited 1 time(s). Last edit at 05/03/2015 10:33PM by Scott Gamble.

Options: ReplyQuote
Re: RodMaker Magazine
Posted by: Barry Chapman (---.opera-mini.net)
Date: May 03, 2015 11:12PM

I had the same problem when I first tried to subscribe & eventually phoned him & my emails were found in the rubbish bin .It might be better to give him a ring .You might have to do it a few times as they appear to shun the phone . good luck with it

Regards Baz

Bundeena
NSW Australia

Options: ReplyQuote
Pages: Previous12
Current Page: 2 of 2


Sorry, only registered users may post in this forum.
Webmaster