SPONSORS
2024 ICRBE EXPO |
Sanding Stick
Posted by:
ALTON BENTLEY
(---.dhcp.hckr.nc.charter.com)
Date: August 23, 2014 05:15PM
I found a neat tool to help sand the legs on my guides!
Go to www.excelhobbyblades.com search for the following Product # 55678 Sanding Stick w/extra belt. Product #55679 Sanding belts assorted! The tool is color coded depending on sand belt grit. They have 120, 240, 320, 400, 600 and 80 grit. The tool I use comes with 240. I picked mine jp at a model (car/airplane) store! in Fayetteville, NC I use hemostat to hold the guides! Took some plastic tubing and insert over the ends of the hemostat to help damage control. Still have to be careful! I build bass rods dealing with sort of small guides. Re: Sanding Stick
Posted by:
Ken Finch
(204.45.134.---)
Date: August 23, 2014 07:41PM
I have used emery boards to do much the same thing. Your product is probably a heck of alot better and longer lasting. Good tip. Thanks. Re: Sanding Stick
Posted by:
Keith Smith
(---.adtran.com)
Date: August 24, 2014 09:46AM
great idea... Sorry, only registered users may post in this forum.
|