SPONSORS
2024 ICRBE EXPO |
Powell AXS BlankS !!!
Posted by:
Solana
(---.salta.sinectis.com.ar)
Date: November 06, 2001 10:32PM
Any Spec. on building from "AXS-POWELL" Blanks ? 3 Piece-models , how are they shipped/packed/inscribed ... Any comments will help ... ¿Spinning Them ? THANKS !!! Re: Powell AXS BlankS !!!
Posted by:
Mike B.
(---.proxy.aol.com)
Date: November 07, 2001 07:20PM
Have not seen them yet. I would think they would perform like any others and be spined the same way. Could not say how they list or inscribe them. Who are their dealers so far? They should be able to tell you. Re: Powell AXS BlankS !!!
Posted by:
Solana
(---.salta.sinectis.com.ar)
Date: November 08, 2001 08:27AM
Dealers are really Hard-To-Find , any Mayor retail store would get the blank if made payment in advance and wait for a few months ! Factory Built POWELL Rods are really great , also hard to find, and expensive. So, i was wondering about and considering the possibility of building my own from original Powell blank. THANKS !!! Re: Powell AXS BlankS !!!
Posted by:
Mike C.
(---.mn.us.prserv.net)
Date: November 08, 2001 08:46AM
Merrick Tackle (link on the left) carries Powell blanks, but you need to be a licensed rod builder (they are wholesale only). Any case you may email to find out about the blanks. factory
Posted by:
Mike B.
(---.proxy.aol.com)
Date: November 08, 2001 09:19PM
Maybe you could call the Powell factoy and ask them who carries the banks and if no one in your area does maybe they will sell you one directly. Good luck. Sorry, only registered users may post in this forum.
|