SPONSORS
2024 ICRBE EXPO |
Payne 100 fly rod
Posted by:
Douglas Sieving
(---.pn.at.cox.net)
Date: June 03, 2014 08:07PM
Het guys...new to the site. Glad I found it. I am about to make a Payne 100 rod and have the tapers and the distance between the guides but need the actual guide sizes. Does anyone have them and mind sharing them with me?
Thanks. Douglas Re: Payne 100 fly rod
Posted by:
Ken Preston
(---.hsd1.md.comcast.net)
Date: June 05, 2014 04:48PM
Just so you know you are not being ignored. I've looked through all the reference material I have on hand and did not find anything on original guide sizes. I built myself a Payne 100 a couple of years ago but broke with 'tradition and used single foot guides on it so I can't be of any help to you Re: Payne 100 fly rod
Posted by:
Lou Auret
(204.16.161.---)
Date: June 06, 2014 02:03PM
Douglas, i too built one but went with size 3 snakes with a 10mm SIC single foot stripper.
Not traditional at all. Sorry, only registered users may post in this forum.
|