SPONSORS
2024 ICRBE EXPO |
double check my math?
Posted by:
Shawn Engel
(190.107.140.---)
Date: June 03, 2014 08:00PM
Sorry didn't pay much attention in math, don't want to order the wrong sizes.. Rod tip is 0.294 so I would need a size 20 tube, and 0.328 would be a size 22? Seat is 0.808 so that would require me to use a .ah22m 848" reel seat [www.mudhole.com] Re: double check my math?
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: June 03, 2014 08:17PM
You can have the supplier fit the tip and seat and tell you what you need
But Will the reel fit the seat They should know this Also Here is a site that you can change measurements so you can understand them better [www.infoplease.com] Bill - willierods.com Re: double check my math?
Posted by:
Ted Morgan
(---.pa.nsw.optusnet.com.au)
Date: June 03, 2014 10:24PM
0.294 inches = 18.8/64. So a 19 tube, approx 7.5 mm.
0.328 inches = 20.99/64. So a 21 tube, approx 8.5 mm. 0.808 blank diameter will be a tight fit with a size 20 seat. A size 22 seat will need a thin arbor. 22mm is 0.866 inches. Your 0.848" seat will be fine. Re: double check my math?
Posted by:
Shawn Engel
(190.107.140.---)
Date: June 04, 2014 01:19PM
Thanks guys Sorry, only registered users may post in this forum.
|