SPONSORS
2024 ICRBE EXPO |
Fuji casting reel seat question
Posted by:
James Francis
(---.wmisdsl.com)
Date: March 13, 2014 02:24PM
Looking at the Fuji ECSM Exposed Blank Reel Seat. It says "it also features a unique 7.9-degree offset for added comfort".
It's not clear to me where this offset is. Initially I was expecting it to be in the grip, that is, angled down like a pistol grip. I'm not picturing how that could work with a through-blank handle though. So it must be elsewhere? If so where? Re: Fuji casting reel seat question
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: March 13, 2014 02:34PM
Does the hole drilled in the seat to take the blank Look like it is drilled Centered ??
I never noticed Some one here should know Bill - willierods.com Re: Fuji casting reel seat question
Posted by:
James Francis
(---.wmisdsl.com)
Date: March 13, 2014 04:18PM
I don't know. All the pictures I've been able to find of it show the same view from the Fuji catalog it seems. Re: Fuji casting reel seat question
Posted by:
David Parsons
(---.hsd1.pa.comcast.net)
Date: March 13, 2014 06:33PM
I Just put one on a blank the other day.Just went down to my work area to compare to other reel seats.tthe only thing I could see was the trigger had more of a curve in it compared to another Fuji trigger reel seat that i put side by side. went back down a second time with a machist square and it looks like the triggger is 7 degree off of being at a 90 degree angle. Re: Fuji casting reel seat question
Posted by:
Tom Wewerka
(---.bltmmd.fios.verizon.net)
Date: March 13, 2014 10:49PM
David
That's an awesome response to Jim's question. I have a question too. If that 7.9 degree offset does as Fuji suggests to adding comfort it would be a great selling feature in building rods with the ECSM reel seats. So my question is, on the rod you just built can you feel any significant difference in that offset? Thanks, Tom Re: Fuji casting reel seat question
Posted by:
James Francis
(---.wmisdsl.com)
Date: March 14, 2014 12:41AM
I compared the triggers on the Fuji web page and it's hard to see much difference in the angle as none of them are straight, but you may be right.
I sent off an email to Fuji asking about it. BTW is there any place that lists the weight of the various seats? Re: Fuji casting reel seat question
Posted by:
David Parsons
(---.hsd1.pa.comcast.net)
Date: March 14, 2014 03:52PM
I have not put the eyes on yet but the reel seat has a nice shape to it where your trigger finger fit around to the sides my hand and finger are large and they fit. this is my first blanked expose seat so I have nothing to compare to in blank exposed .I used the palm support and liked then alot.Jim let us know what FUJI says Re: Fuji casting reel seat question
Posted by:
James Francis
(---.wmisdsl.com)
Date: March 15, 2014 01:14PM
No reply from Fuji yet. Sorry, only registered users may post in this forum.
|