SPONSORS
2024 ICRBE EXPO |
blow drying CP
Posted by:
Bill Cohen
(---.dhcp.embarqhsd.net)
Date: October 24, 2013 05:58PM
often wondered about this topic If you blow dry the CP dry to touch and do it 2x how long after can you start to finish coat ? Re: blow drying CP
Posted by:
Tom Kirkman
(Moderator)
Date: October 24, 2013 06:24PM
You can apply finish when the CP is dry.
It would be almost impossible for anyone to sell you how it will take to dry CP with the aid of a blow dryer. Too many variables involved. All things considered, I'd take the safe route and just let the CP dry overnight at room temperature. ............ Re: blow drying CP
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: October 24, 2013 06:37PM
Listen to Tom
i have with certain CPs forced dry and they dried colored like they were burnt ?? Let dry over night It only takes about 30 mins for them to set and take off the turner depending on how warm your place is Forcing any thing to dry only gets you in trouble If you do and need to get some thing dry fast Do use the heat ( lightly ) Don't over heat and get things to hot Bill - willierods.com Edited 2 time(s). Last edit at 10/24/2013 08:09PM by bill boettcher. Sorry, only registered users may post in this forum.
|