Does anyone know what kind of decal is supplied with the ATC microwave guide set?

I have been trying to peel the backing off,, and it has not gone well. My wife have better fingernails than me, and she can't gt it either.

Thanks
Bert

It is peel and stick....I've never had am issue with them, try using a razor blade to separate.

______________________________________
Super Tight Lines......Don

Curiosity got the best of me...I've got a couple I didn't try to use...sure enough, w/ magnification and a razor blade, I was able to discern they're peel and stick. If ya need a couple, I'll drop em in the mail. Jerry

Jerry, Thanks for the offer, but I have 3 pd them. Just can't get the backing off. I was not even sure if the decal was peel and stick

Thanks for the replies

Bert

Used a razor blade to start the backing and got the decal installed. Did not even cut myself :-)

Thanks again
Bert

Hi Bert,

Two pieces of masking tape one on the front the other on the backing, leave the one on the front on until you place the decal on the rod then remove it. This works a treat for most decals and everytime in MWG decals.

Cheers

Mark Newcombe
Old Bar NSW
Australia
markscustomfishing.com
American Tackle Pro-Staff

Check out this video, it is the best way we have found to apply these type of decals.
[www.youtube.com]

Regards,
Todd Vivian
Mud Hole Custom Tackle

todd@mudhole.com