I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

building under table foot pedal
Posted by: Walt Besuden (---.se.biz.rr.com)
Date: June 14, 2013 02:07PM

I have some pics but would like more if any one has them

Options: ReplyQuote
Re: building under table foot pedal
Posted by: Tom Kirkman (Moderator)
Date: June 14, 2013 02:43PM

You mean like a foot control board?

.........

Options: ReplyQuote
Re: building under table foot pedal
Posted by: Barry Thomas Sr (---.hsd1.nj.comcast.net)
Date: June 14, 2013 11:21PM

Walt; unhide your email or email me. It will be easier to send the photos by Email

[www.rodbuilding.org]



Edited 1 time(s). Last edit at 06/14/2013 11:23PM by Barry Thomas Sr.

Options: ReplyQuote
Re: building under table foot pedal
Posted by: Walt Besuden (---.se.biz.rr.com)
Date: June 17, 2013 12:51PM


Options: ReplyQuote
Re: building under table foot pedal
Posted by: Walt Besuden (---.se.biz.rr.com)
Date: June 17, 2013 12:52PM

yes Tom

Options: ReplyQuote
Re: building under table foot pedal
Posted by: bill boettcher (---.dyn.optonline.net)
Date: June 17, 2013 05:37PM

Walt

Get his phone number and call A lot easer to get things understood

Bill - willierods.com

Options: ReplyQuote
Re: building under table foot pedal
Posted by: Barry Thomas Sr (---.hsd1.nj.comcast.net)
Date: June 17, 2013 09:50PM

Walt; Email sent 609-972-8300 My lathe is set up for DC power

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster