SPONSORS
2024 ICRBE EXPO |
CTS Heaver
Posted by:
chris stevenson
(---.bltmmd.fios.verizon.net)
Date: April 18, 2013 06:13PM
anybody got a good starting layout for a cts se1364-2,e-mailed them directly but i'm guessing with their move to better facilities they're a bit busy.oh ..lay out is conventional using a avet sx,thanx alot www.southriverrodsllc.com Re: CTS Heaver
Posted by:
louis caruso
(---.dyn.optonline.net)
Date: April 19, 2013 05:20PM
Go To "R H Custom Rods" and contact Rich. He should have one for you.... Re: CTS Heaver
Posted by:
Tom Bjornsen
(---.sub-70-192-196.myvzw.com)
Date: April 23, 2013 08:06AM
Well,
I don't know if this will help, but it may be a start. I have a CTS 1363 that was built a long time ago by the original owner of Fishsticks (and original importer of CTS Rods). From the Tip; 4 & 3/4 10 & 3/4 18 25 & 3/8 34 & 3/8 47 & 3/8 64 & 1/8 88 & 3/4 That is with the center of the reel seat at 30" from the butt. Hope that helps. TjB Tom Bjornsen C-Ville ~ Va. Re: CTS Heaver
Posted by:
chris stevenson
(---.bltmmd.fios.verizon.net)
Date: April 24, 2013 09:33AM
thanks tom,that get me in the ball park or at least confirm my calcs www.southriverrodsllc.com Re: CTS Heaver
Posted by:
Tom Bjornsen
(---.sub-70-192-201.myvzw.com)
Date: April 24, 2013 09:20PM
I was throwing it today, with 7 and a head, and while there were no takers, it remains an absolute joy to throw.
I Loves Me Some CTS! Tom Bjornsen C-Ville ~ Va. Sorry, only registered users may post in this forum.
|