I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

CTS Heaver
Posted by: chris stevenson (---.bltmmd.fios.verizon.net)
Date: April 18, 2013 06:13PM

anybody got a good starting layout for a cts se1364-2,e-mailed them directly but i'm guessing with their move to better facilities they're a bit busy.oh ..lay out is conventional using a avet sx,thanx alot

www.southriverrodsllc.com

Options: ReplyQuote
Re: CTS Heaver
Posted by: louis caruso (---.dyn.optonline.net)
Date: April 19, 2013 05:20PM

Go To "R H Custom Rods" and contact Rich. He should have one for you....

Options: ReplyQuote
Re: CTS Heaver
Posted by: Tom Bjornsen (---.sub-70-192-196.myvzw.com)
Date: April 23, 2013 08:06AM

Well,
I don't know if this will help, but it may be a start.
I have a CTS 1363 that was built a long time ago by the original owner of Fishsticks (and original importer of CTS Rods).
From the Tip;
4 & 3/4
10 & 3/4
18
25 & 3/8
34 & 3/8
47 & 3/8
64 & 1/8
88 & 3/4

That is with the center of the reel seat at 30" from the butt.

Hope that helps.
TjB

Tom Bjornsen
C-Ville ~ Va.

Options: ReplyQuote
Re: CTS Heaver
Posted by: chris stevenson (---.bltmmd.fios.verizon.net)
Date: April 24, 2013 09:33AM

thanks tom,that get me in the ball park or at least confirm my calcs

www.southriverrodsllc.com

Options: ReplyQuote
Re: CTS Heaver
Posted by: Tom Bjornsen (---.sub-70-192-201.myvzw.com)
Date: April 24, 2013 09:20PM

I was throwing it today, with 7 and a head, and while there were no takers, it remains an absolute joy to throw.
I Loves Me Some CTS!

Tom Bjornsen
C-Ville ~ Va.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster