I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Going to attempt first build: Blank question
Posted by: Sam Moore (---.pools.spcsdns.net)
Date: March 05, 2013 11:40PM

nevermind...got my answer



Edited 1 time(s). Last edit at 03/06/2013 12:49AM by Sam Moore.

Options: ReplyQuote
Re: Going to attempt first build: Blank question
Posted by: roger wilson (---.hsd1.mn.comcast.net)
Date: March 06, 2013 10:44AM

Sam,
As has been said by many folks to many individuals just starting out on their first build.

DON't start on an expensive blank using expensive guides.

Rather - start with a decent - inexpensive blank, using decent inexpensive guides, butt grip and reel seat.

Take your time and learn as you go and you will be in good shape. But don't beat yourself up if the first rod is not perfect, because it is NOT likely to be perfect. But, just use it as a kick start for better things to come. It is all about experience, and learning.

The problem is that if you buy a very expensive blank and use very expensive guides and end up with a rod that is all right - but not perfect ( most likely), every time you use it you will beat yourself up for making these choices.

But, welcome and the main thing - enjoy yourself as you do this new to you occupation.

Roger

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster