SPONSORS
2024 ICRBE EXPO |
782 blank replacement
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: March 04, 2013 06:39PM
Last week, there was a topic about someone looking for a replacement for an IMX 782 blank.
I made the suggestion about using a Batson RX8 blank. Kerry Batson sent me a nice e-mail with the following setup for using his RX8 blank for this build as follows: ================================== RX8 XSB782 XSB782 Rainshadow RX8 Bass Spin Component Part Number Part Description Rod Blank Model # XSB782-TC 6' 6" 1pc 8-14lb 1/4- 5/8oz - Titanium Chrome Butt Cap: HESGFB1.5S-350 1.5" High End Splitgrip Super Grade ID .350" Trim: AWC476 Aluminum Winding Check Trim for HESGFB1.5S-350 Split Grip: HEFG3.5S-250 3.5" High End Foregrip Super Grade ID .250" Trim: AWC449 Aluminum Winding Check Trim for HEFG3.5S-250 Reel Seat Body: BPSTG16 Textured Gray Graphite Reel Seat Body -Place back of reel seat 7" inches up from butt- Reel Seat Hood: GTT16C-SN-TC Hood w/cushion Single Nut - TiCH Coated Chrome Reel Seat Trim Ring: TRS16-TC x 2 Trim Ring for each side of Spin Seat size 16 TiCH Fore Grip: HEFG2.0S-250 2" High End Foregrip Super Grade ID .250" Winding Check: AWC398 Lt TitCar Plated Winding Check .398" I.D. Hookeeper: TCHKS Hook Keeper TiCH Small Tip Top: XTCPPCT06R04.5 ALPS SS316-RRD-P Top 06 TiCH Ring 4.5 Tube - TICH w/o Chrome Guides (see below for size and quantity) XPTCFCG ALPS SS316 - TiCH w/o Chrome Single Foot with TiCH Zirconium Ring RRD Guides (see below for size and quantity) XTCYTCG ALPS SS316 Y Guide TiCH w/o Chrome Single Foot with TiCH Zirconium Thin Ring Guide order from the tip top Guide Guide Placement - In inches from the tip top 1st XPTCFCG06 4.5" 2nd XPTCFCG06 9.5" 3rd XPTCFCG07 15" 4th XTCYTCG07 21" 5th XTCYTCG10 28" 6th XTCYTCG16 35.5" 7th XTCYTCG25 44" Karry Batson Batson Enterprises, Inc Phone: 877-875-2381 Fax: 360-683-3579 karry@batsonenterprises.com www.batsonenterprises.com www.rainshadowfishing.com Re: 782 blank replacement
Posted by:
Bill Pulk-Midwest rod and reel
(70.97.195.---)
Date: March 04, 2013 08:35PM
HAD A CUSTOMER BY THIS SET UP A WEEK OR TWO BACK...HE WAS VERY HAPPY WITH IT...TOP OF THE LINE SET UP Bill@midwestrodandreel.com www.midwestrodandreel.com Sorry, only registered users may post in this forum.
|