SPONSORS
2024 ICRBE EXPO |
BOTTOM TROLLING MED STYLE
Posted by:
Chris Phillips
(---.netrun.cytanet.com.cy)
Date: February 26, 2013 11:20AM
I am in search of some very specific fishing application blanks. This technique is slow trolling (1kt), with a 1kg finned weight, dragging live bait approximately one to two meters from the sea floor. Widely used in the Mediterranean and developed by the Italians which call it "Traina Piombo Guardiano". Lots of You-tube videos for anyone that wishes to find out more.
With the Athens fishing festival coming up in April I am in search of some 8 foot 1+ pieces 20-40Lbs Moderate to Fast action Blanks. A good example on the required action would be the Calstar graphiter 20-50lbs. Anyone that has something in mind please let me know. Phillips Hot Rods C Y P R U S [phillipshotrods.wix.com] Re: BOTTOM TROLLING MED STYLE
Posted by:
John E Powell
(168.169.226.---)
Date: February 26, 2013 03:28PM
You might consider the discontinued Lamiglas NZ1022XH. You probably could trim the back half a bit to get the length your looking for. There's also the NC962H. I think Angler's Workshop has them on their Lamiglas closeout list still. Edited 1 time(s). Last edit at 02/26/2013 10:06PM by John E Powell. Re: BOTTOM TROLLING MED STYLE
Posted by:
chris stevenson
(---.bltmmd.fios.verizon.net)
Date: February 26, 2013 04:42PM
seeker s670-8 or seeker hercules gts80h www.southriverrodsllc.com Re: BOTTOM TROLLING MED STYLE
Posted by:
Chris Phillips
(---.netrun.cytanet.com.cy)
Date: February 27, 2013 02:33AM
Thanks John,
i looked it up, looks good. Chris thanks, however the Seekers are single piece, . It has to be 1+. Sorry, only registered users may post in this forum.
|