I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

ATC at ICRBE and the Microwave Challenge
Posted by: Ben Stein (---.se.biz.rr.com)
Date: February 19, 2013 05:23PM

This year, American Tackle will be exhibiting in booths 201 and 402. Come on by and chat with our knowledgeable staff and create your ultimate ATC component setup. We will have the entire Bushido Warrior blank selection, Pro Wrap Thread and much, much more.

Visitors will also be able to take the “Microwave Challenge” as well as discuss the system with its inventor, The Bass Professor, Doug Hannon. Details for the Microwave Challenge are as follows:

And a complete schedule of events for American Tackle can be found using this link: [archive.constantcontact.com]

Join American Tackle’s Ben Stein and the NERBS, Billy Vivona, for a full presentation and demonstration of the revolutionary MicroWave Line Control System.

• Presentation and Demonstrations will be held at the times listed below.

• Everyone will meet at the ATC booth 201 and 402 and depart for casting grounds:

9:30 am
12:30 pm
3:30 pm

• For details please ask the American Tackle Staff located at Booth 201 and 402.

The MicroWave Line Control System will be available at the show through these participating vendors:
(in alphabetical order)

Bingham Enterprises – booth 601, 603, 605, 607

Fish Sticks – booth 701, 703, 705, 707

Mudhole – booth 208, 210, 212, 214, 216, 218, 220, 224

NERBS - booth 115, 117

Swampland – booth 401, 403, 405, 407

For the further information and complete schedule of events for American Tackle’s exhibition, reference this newsletter:
[archive.constantcontact.com]

If you are attending please stop by the American Tackle booth to say hello!

Team American Tackle,
Hunter, Mick, and Ben

Options: ReplyQuote
Re: ATC at ICRBE and the Microwave Challenge
Posted by: Billy Vivona (---.nycmny.fios.verizon.net)
Date: February 19, 2013 06:10PM

Looking forward to doing this!! I've done a few MW casting demos at NERBs Gatherings in SI, NJ, Mass, and Iowa - it's great to see people's faces the first time they see the line shoot through that first guide.

I'll also have most of the Bushido blanks at The NERBs booth, MagBass, SpinJig, DropShot, SpinnerBait, & CrankBait. .

Options: ReplyQuote
Re: ATC at ICRBE and the Microwave Challenge
Posted by: Buzz Butters (---.ripon.k12.wi.us)
Date: February 20, 2013 11:00AM

Ben, not sure what the Challenge will be but if you are keeping track of distance, rod set up etc please post the results so those of us not at the Expo can learn.
thanks
Buzz

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster