I nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods
Goto Topic: Previous•Next
Goto: Forum List•Message List•New Topic•Search•Log In Or Register•Print View
Looking for a guide vendor
Posted by: Terry Kirk (---.co.shawnee.ks.us)
Date: February 14, 2013 10:23AM

Can someone direct me to a vendor here, or a vendor contact me that sells tip tops in tube sizes smaller than 4? Thanks.

Options: Reply•Quote
Re: Looking for a guide vendor
Posted by: bill boettcher (---.dyn.optonline.net)
Date: February 14, 2013 12:02PM

here ya go
[www.mudhole.com]
Pac Bay has a lot also

Bill - willierods.com



Edited 1 time(s). Last edit at 02/14/2013 12:26PM by bill boettcher.

Options: Reply•Quote
Re: Looking for a guide vendor
Posted by: Ron Weber (12.70.3.---)
Date: February 14, 2013 12:35PM

I would try Karen @ Bingham, she is right there in Kansas

Ron Weber

Options: Reply•Quote
Re: Looking for a guide vendor
Posted by: Terry Kirk (---.co.shawnee.ks.us)
Date: February 14, 2013 01:12PM

Thanks Bill but Mudhole did not stock any smaller than 4 when i contacted them a few days ago.

Options: Reply•Quote
Re: Looking for a guide vendor
Posted by: Terry Turner (---.hsd1.or.comcast.net)
Date: February 14, 2013 04:26PM

3.5 is as small as I've ever gone. Anglers Workshop has a couple of choices there. REC for sure.

Terry

Options: Reply•Quote
Re: Looking for a guide vendor
Posted by: Thomas Kaufmann (---.nbrncmtc01.nwbrnc.ab.dh.suddenlink.net)
Date: February 14, 2013 05:21PM

I got mine from Karen at Bingham.

Options: Reply•Quote
Re: Looking for a guide vendor
Posted by: bill boettcher (---.dyn.optonline.net)
Date: February 14, 2013 06:28PM

if you can -- use a 4 tube and put either A size thread wrap over the blank If that does not tighten it up try D
put it on ( after preping the tip ) in wide diamons so the glue grabs the blank

they stated on my cart they are out of Aero reel seats ??? Not good

Bill - willierods.com



Edited 1 time(s). Last edit at 02/14/2013 06:32PM by bill boettcher.

Options: Reply•Quote
Re: Looking for a guide vendor
Posted by: roger wilson (---.hsd1.mn.comcast.net)
Date: February 14, 2013 06:51PM

[www.angelfire.com]

Options: Reply•Quote
Re: Looking for a guide vendor
Posted by: Bill Sidney (---.gci.net)
Date: February 14, 2013 08:29PM

have youlooked atice fishing guides don't know if it is what you want but they go to 2.5

Options: Reply•Quote


Goto: Forum List•Message List•Search•Log In Or Register
Sorry, only registered users may post in this forum.
Click here to login
Webmaster