I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Need Ideas
Posted by: Pat Connor (---.hsd1.tx.comcast.net)
Date: December 29, 2012 04:34PM

Need ideas for a rod drying box .

Options: ReplyQuote
Re: Need Ideas
Posted by: Tom Kirkman (Moderator)
Date: December 29, 2012 05:53PM

Make sure you check the photo page. Use the search feature there. You should be able to uncover several dozen of them.

................

Options: ReplyQuote
Re: Need Ideas
Posted by: roger wilson (---.hsd1.mn.comcast.net)
Date: December 30, 2012 10:00AM

A cardboard refrigerator box - cut down to size works just fine for a great inexpensive drying box.

Or just make a cabinet of wood, with a Plexiglas cover and a few low wattage light bulbs inside to provide heat works very well.

Roger

Options: ReplyQuote
Re: Need Ideas
Posted by: Pat Connor (---.hsd1.tx.comcast.net)
Date: December 31, 2012 06:15AM

Thanks looks like I will try my skills at cabinet making .

Options: ReplyQuote
Re: Need Ideas
Posted by: Casey Abell (---.dhcp.insightbb.com)
Date: December 31, 2012 01:03PM

So can someone please fill me in as to what the drying box is for ???? Is it to hold in heat in order to dry the epoxy faster.. or just for keeping dust etc off the finish.



thanks

Options: ReplyQuote
Re: Need Ideas
Posted by: bill boettcher (---.dyn.optonline.net)
Date: December 31, 2012 04:06PM

both

Bill - willierods.com

Options: ReplyQuote
Re: Need Ideas
Posted by: John E Powell (---.buffalo.res.rr.com)
Date: December 31, 2012 04:34PM

It can also help protect the finished rod from mishaps while it dries, not just dust.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster