SPONSORS
2024 ICRBE EXPO |
less costly way
Posted by:
Bill Cohen
(---.dhcp.embarqhsd.net)
Date: September 11, 2012 10:36AM
Ive been blown away buy the cost of shipping over sized rods . A $100 10 ft rod would cost almost double to ship. There has to be a cheaper way to get to these items sent . How about some some suggestions . PS would anyone be interested in buying a shipping container of over sized rods lol Edited 1 time(s). Last edit at 09/11/2012 12:29PM by Maryann Cohen. Re: An easier way
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: September 11, 2012 10:59AM
Maryann,
Have you checked into Yellow Freight? Or, any other freight carrier? Roger Re: An easier way
Posted by:
Bill Cohen
(---.dhcp.embarqhsd.net)
Date: September 11, 2012 12:25PM
Roger Yellow Freight was $200, Please dont get the idea I'm critical of your reply. Im doing the research not only for my self but the other people on the forum who may be in the same predicament. Re: An easier way
Posted by:
Buzz Butters
(---.ripon.k12.wi.us)
Date: September 11, 2012 01:27PM
This isn't much help but anytime I order rods 7 foot or longer my shipping bill, with other parts is always $30.00 or more. I remember the day when if you ordered over $1,000.00 worth of parts, shipping was free........ I also remember really good cork rings that were really cheap............. Re: less costly way
Posted by:
Tom Kirkman
(Moderator)
Date: September 11, 2012 06:56PM
Unfortunately, there is no cheaper way. Anything over 10 feet is best bought in multiples so you can break the shipping charge down among several blanks.
Or, you can attend the 2013 Expo and buy a long one-piece blank with no shipping charge to worry about. Of course, if you're not driving this may not work out for you. ................... Re: less costly way
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: September 14, 2012 07:42AM
I know people think a one piece is better But why not a two piece The way and materials blanks are made of today a two pc is just as good as a one pc And cheaper IMHO Bill - willierods.com Sorry, only registered users may post in this forum.
|