SPONSORS
2024 ICRBE EXPO |
blank coat
Posted by:
Chris Phillips
(---.netrun.cytanet.com.cy)
Date: August 16, 2012 04:33AM
Got some sanded blanks from Mudhole clearance , and was thinking to coat them blanks ,give them a bit of luster. Any one used a good product for this purpose please let me know.
Thanks. Phillips Hot Rods C Y P R U S [phillipshotrods.wix.com] Re: blank coat
Posted by:
Don Morse
(---.dhcp.aldl.mi.charter.com)
Date: August 16, 2012 05:52AM
permagloss.... do a search, there are a lot of discussions about use and storage. ______________________________________ Super Tight Lines......Don Re: blank coat
Posted by:
Chris Phillips
(---.netrun.cytanet.com.cy)
Date: August 16, 2012 06:22AM
Thanks will do Re: blank coat
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: August 16, 2012 07:16PM
Chris,
Another option is to polish them. Then, build the rod. After building the rod and coating it, then use a hard wax to coat the blank and then polish out the wax. Take care REW Sorry, only registered users may post in this forum.
|