I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Veritas Micro series guides???
Posted by: Zachary Kowasz (---.nys.biz.rr.com)
Date: August 13, 2012 08:23AM

I have a 7' MH Abu Garcia veritas (purchased before I started building) and I broke the next guide up from the butt guide and can not figure out what type of guides they used so I can fix it. It looks to be a 5mm, but the kicker is that it has a short "Y" frame like a mineature single foot spinning guide. Does anyone know what these are??

Options: ReplyQuote
Re: Veritas Micro series guides???
Posted by: bill boettcher (---.dyn.optonline.net)
Date: August 13, 2012 09:09AM

go to mudhole and check out fuji pacbay american tackle

Bill - willierods.com

Options: ReplyQuote
Re: Veritas Micro series guides???
Posted by: Zachary Kowasz (---.nys.biz.rr.com)
Date: August 13, 2012 12:43PM

I tried . . . I was not able to find anything with the "Y" frame in a size 5. I even called abu, they didn't know what guides they used and told me to call jann's netcraft because they got guides from them. I can't find anything from jann's, and they had no Idea either. I'm about reaady to scrap the thing and build a new one.

Options: ReplyQuote
Re: Veritas Micro series guides???
Posted by: bill boettcher (---.dyn.optonline.net)
Date: August 13, 2012 01:57PM

put up a picture if you can

some one will know

Bill - willierods.com

Options: ReplyQuote
Re: Veritas Micro series guides???
Posted by: bobby stout (---.redriver.army.mil)
Date: August 13, 2012 03:22PM

if you cannot find one i have three of the rods that are broke i can take one off for you.

Bobby Stout
Bloomburg, TX

Options: ReplyQuote
Re: Veritas Micro series guides???
Posted by: Zachary Kowasz (---.nys.biz.rr.com)
Date: August 14, 2012 07:47AM

Thanks guys! I'll try to get a pic up tonight.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster