i want to build my 1st rod for my father b"day

here is my blank's spec:

high modulus graphite
length: 8'
sec: 2pcs(mid joint)
power: Hard
action: Fast
line test: 12-35lbs
(just local asian's graphite blank so not to impotant if i mentioned the brand's name)

here is the size fuji guide that I have:

PLCSG: 12M; 12; 10; 8; 6; 6; 6; 6; 6; 6; 5.5 ;5.5 ;5.5; 5.5
MNST: 5,5 (top)
(you want believe that i just spend less than $70 for this 15 SIC low rider guide)

I want this rod use ring as small as possible with conventional setup (guide on top)

so i'll eliminate 3 biggest size and will start from #8

anyone has experince with this ring on baitcasting setup before? how its cast?

is it possible if i use #8x1; #6x6; #5.5x4 + 5'5 top without touching blank?

note:
-i knew you'll sugest me to do static test, I'll do it later when those packet ring arrive next week
-this rod will use with frog lure and big buzz bait for giant snakehead so more stiff will be better

regards

Get rid of the size 6's and go straight to the 5.5's for a straighter and smoother line path. This is assuming that you already know that the 5.5's will be properly sized for easily passing your line and any leader connections.

...............

ok thanks Tom
I used PE #3-5 with no leader just small bimini+cat paws+snap
rgrds