SPONSORS
2024 ICRBE EXPO |
Spiral Wrap Casting rod with Match Micro Guides
Posted by:
Doug Lockwood
(---.lightspeed.whtnil.sbcglobal.net)
Date: July 26, 2012 07:08PM
I was wondering if anyone else had tried Match #4 guides on their casting rod build.
I completed a build on a L842-MHX using this variation and was very pleased. I used a SIC match #5 in the zero position, Minima #4 match guides for the 60, 120 and 180 degree guides This rod used the #2 Nano-Micro guides from Mud Hole as runners. While I came up with this independently, I assume I am not the first, as this is an obvious variation of the standard practice. I was taught the classic "Roberts" method, and simply substituted micro guides. Thanks in advance for your comments. Doug Re: Spiral Wrap Casting rod with Match Micro Guides
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: July 27, 2012 12:35AM
If it works, go for it.
Roger Sorry, only registered users may post in this forum.
|