SPONSORS
2024 ICRBE EXPO |
ThreadMaster One
Posted by:
Lance Dupre
(---.lightspeed.nworla.sbcglobal.net)
Date: July 25, 2012 01:59AM
We are now stocking the new Threadmaster One, one part rod finish from RodDancer Products. Click on the link to take you to the description and pricing.
[swamplandtackle.com] Lance Re: ThreadMaster One
Posted by:
lorenzo tellez
(---.hsd1.il.comcast.net)
Date: July 25, 2012 08:35AM
Would I need to mix this epoxy? or do I just use it straight out of the bottle? Re: ThreadMaster One
Posted by:
Robert A. Guist
(---.nmci.navy.mil)
Date: July 25, 2012 09:12AM
Hello Lorenzo.
You can use it right out of the bottle. Bob, New Bern, NC. Re: ThreadMaster One
Posted by:
Billy Vivona
(---.nycmny.fios.verizon.net)
Date: July 25, 2012 10:04AM
What is one part finish? Re: ThreadMaster One
Posted by:
Scott D parsons
(205.244.119.---)
Date: July 25, 2012 12:41PM
meaning you don't have to mix 2 parts together. Response has been fantastic, sold out of the first batch in 3 days, more now on order.
Thanks for the support Scott Scott Parsons 919-900-8998 [www.roddancer.com] [www.fishhawkthreads.com] Re: ThreadMaster One
Posted by:
Ken Driedger
(---.bchsia.telus.net)
Date: July 27, 2012 11:41AM
Hello Scott. I checked out the application procedures, for the TM one, and did not see the clock time to tack free. I see the 3 day wait to cure, but not to tack free. For this post, let's just say +20 centigrade. That's about 72 or so in the F scale. Thanks, Ken. Sorry, only registered users may post in this forum.
|