SPONSORS
2024 ICRBE EXPO |
wood handle
Posted by:
Judd Stanislawski
(---.docsis.hbci.com)
Date: June 13, 2012 06:34PM
looking for a spinning rod handle in wood. Supplier recommendations? Re: wood handle
Posted by:
Bill Pulk-Midwest rod and reel
(70.97.195.---)
Date: June 14, 2012 04:21AM
E-MAIL JUDD...I HAVE A PERSON THAT CAN DO IT FOR YOU Bill@midwestrodandreel.com www.midwestrodandreel.com Re: wood handle
Posted by:
. Douglas Webb
(---.sub-75-220-79.myvzw.com)
Date: June 14, 2012 08:32AM
I turn and sell wood handles and reel seats. All are bored and have urethane inserts to reduce weight. I have a good selecttion of stabilized wood and some natural woods in stock. However, I work out of state three weeks at a time and am at work until July 8th. If I can be of help just e-mail me. Re: wood handle
Posted by:
Terry Turner
(---.hsd1.or.comcast.net)
Date: June 14, 2012 10:26AM
As you can see, there are several of us that can probably help you out on a small run basis. I have some time available as well, so if you can't strike a deal with any of the other turners, let me know and we can probably work something out. I have both stabilized wood and figured wood available, and can bore for urethane inserts, depending on your rod OD.
Send me an email if you wish and we'll discuss. Terry Re: wood handle
Posted by:
Tom Kirkman
(Moderator)
Date: June 14, 2012 11:07AM
You can also check here: www.tackleworks.org to see if anyone in your area offers this type service.
............. Re: wood handle
Posted by:
Harry Bell
(---.dhcp.aldl.mi.charter.com)
Date: June 17, 2012 02:31PM
See the post right above yours. Sorry, only registered users may post in this forum.
|