SPONSORS
2024 ICRBE EXPO |
Metallic Thread and CP
Posted by:
Jacob Thompson
(---.dc.dc.cox.net)
Date: April 27, 2012 07:45AM
Ive never used metallic thread before and I also never use color preserver on any of my wraps. Im going to build a rod using metallic gold thread but would I need to use CP to keep it the same color or is it not going to change at all? Re: Metallic Thread and CP
Posted by:
Raymond Adams
(---.hsd1.ca.comcast.net)
Date: April 27, 2012 08:40AM
metallic threads do not require CP to retain color Raymond Adams Eventually, all things merge, and a river runs through it.. Re: Metallic Thread and CP
Posted by:
Buzz Butters
(---.static.unas.wi.charter.com)
Date: April 27, 2012 08:56AM
Jacob,
you don't need CP to retain color. However, I like to use it on metallic wraps also as it seals out the air (to some degree) so there are a lot fewer bubbles coming out from the thread when finish is applied. If you are building a heavy duty rod with a lot of stress on the blanks go without CP so the finish does a better job of soaking through the threads and make sure to fill up that guide foot tunnel with finish no matter which technique you use. Buzz Sorry, only registered users may post in this forum.
|