SPONSORS
2024 ICRBE EXPO |
underwrapping guides on a saltwater fly rod
Posted by:
Bob Solee
(---.hsd1.or.comcast.net)
Date: March 26, 2012 01:15PM
I am iin the process of building a 12wt. fly rod that I am taking to Mexico with me next month. I have always underwrapped my guides for my saltwater rods. I personally think that underwrappping is better for the blank. My questions to all, has anyone seen any issues with underwrapping guides on a saltwater fly rod? Does it affect the action of the rod.
Thanks, Re: underwrapping guides on a saltwater fly rod
Posted by:
Tom Kirkman
(Moderator)
Date: March 26, 2012 02:29PM
It's absolutely unnecessary.
The only downside is some slight loss of performance due to the additional weight. A rod as powerful as most in that category will not be overly affected so while not necessary, it won't carry any huge sort of penalty. .............. Re: underwrapping guides on a saltwater fly rod
Posted by:
Terry Turner
(---.hsd1.or.comcast.net)
Date: March 26, 2012 03:24PM
I would agree with Tom on this point. Even though salt water fly rods are substantial, no need to add any extra weight with an under wrap. Fly rods don't use the type of guides that require under wraps compared to a stand-up boat rod. Tom would probably assert that underwraps aren't necessary on those rods either but they are more customary.
Terry Re: underwrapping guides on a saltwater fly rod
Posted by:
Bob Solee
(---.hsd1.or.comcast.net)
Date: March 26, 2012 03:32PM
Thanks so much, I kinda of thought so.
Bob Re: underwrapping guides on a saltwater fly rod
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: March 26, 2012 03:33PM
Use less weight ---- just prep the guide feet - well Bill - willierods.com Re: underwrapping guides on a saltwater fly rod
Posted by:
Bob Solee
(---.hsd1.or.comcast.net)
Date: March 26, 2012 03:33PM
Terry,
Thanks Bob Re: underwrapping guides on a saltwater fly rod
Posted by:
Bob Solee
(---.hsd1.or.comcast.net)
Date: March 26, 2012 03:36PM
Bill,
Very Good, thanks Bob Sorry, only registered users may post in this forum.
|