I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

guide recommendation?
Posted by: James Bare (50.105.27.---)
Date: February 27, 2012 04:16AM

I have a Phenix psw700h blank that I am building for my Okuma Andros reel. I am thinking I will run 40 or 50lb braid on the reel once I go all braid on it. I was planning on doing a spiral wrap, what guides would yall recommend? I was thinking titanium K guides from fuji or virtus light titanium. Also I was thinking of using a 16, 2 12's as the transition guides and then 5 10's. Does that sound about right as a general start? I know I may need to add or take away one of the 10's depending on the rod.

Options: ReplyQuote
Re: guide recommendation?
Posted by: Russell Brunt (165.214.14.---)
Date: February 27, 2012 08:34AM

Solid choice using titanium. I like the virtus lights a lot. You could go with single foot guides on the undersize if desired. Size the butt guide based on width of the reel. Height isn't much of a factor as the line needs to go down. Just keep it off the foregrip and off your wrist. Tens sound a little big to me for your runners but it all depends on knots. Only you know what those will be.

If you are going with a simple bumper style the 90 degree guide works best if you go with a fly rod stlye guide about one size larger than the runners. All the guides on the bottom can be the same size.

Russ in Hollywood, FL.

Options: ReplyQuote
Re: guide recommendation?
Posted by: kevin knox (---.baybroadband.net)
Date: February 27, 2012 12:12PM

Virtus light or the typhoons are fine choices as well s the Batson guides would work very well also. When I build this and most of my spirals, I use a 25 first guide as it gives great line clearance over the hand on the grip. You might want to consider that. I also go 25-12-12-12-10-10-10-10 and a 10 ring top.

Just my 2 cents.

KK

Kevin Knox
ANGLER'S ENVY CUSTOM RODS
QUEEN ANNE, MD 21657
#_#_#_#_#
www.anglersenvy.com

Options: ReplyQuote
Re: guide recommendation?
Posted by: James Bare (50.105.27.---)
Date: February 28, 2012 02:45AM

I don't have a reel seat yet to mount the reel on the rod to see how much clearance I need but the reel sits low enough I dont think I'll need anything bigger than 20, but on the other hand it may be low enough I'll need to go bigger to raise the line up. I might be able to use 8's for runners but I'll have a couple biminis and a connecting knot running though occasionally so I was thinking 10's, and if I go titanium those 10's wont weigh that much.

Options: ReplyQuote
Re: guide recommendation?
Posted by: Jim Ising (---.dyn.centurytel.net)
Date: February 28, 2012 11:23AM

Your first idea is often your best idea.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster