SPONSORS
2024 ICRBE EXPO |
renzetti rod wrapper
Posted by:
david jones
(---.sub-75-201-96.myvzw.com)
Date: February 16, 2012 01:46PM
i was interested in a renzetti rod wrapper, just called them and the only thing they offer is the rod wrapper by itself you have to buy the motor and motor mount. they do not offer the solid state foot petal any more and was wondering what you could use sense that looks to be a ac/dc motor. is it worth it to try and piece this wrapper together or is a cpw wrapper the way to go, need help in what you guys would do i have seen the motor out there for around 65 dollars, so should i piece a new renzetti together or just buy a cpw wrapper i am just starting out in the business and am gearing up to hopefully to do lots of rods, so i will need the best wrapper and i know those are the top ones. and i know when you all bought your renzetti it came as a complete kit so let me know and thanks Re: renzetti rod wrapper
Posted by:
Tom Kirkman
(Moderator)
Date: February 16, 2012 01:48PM
They began offering different motor packages for the same basic machine.
I like the 1/10HP motor for all around use, if they still offer that one. Andy will be in High Point next week for the Expo and I'll ask him what's going on with the lack of a solid state foot control. ................. Re: renzetti rod wrapper
Posted by:
Ed Hickl
(---.hsd1.tx.comcast.net)
Date: February 16, 2012 03:16PM
WW Granger offers motors and solid state foot pedal. Seen this discussed on another thread or post somewhere. Re: renzetti rod wrapper
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: February 16, 2012 05:50PM
Linemaster makes an excellent solid state foot switch.
I have purchased several of them for both my wrappers as well as other shop tools using ac/dc motors. The 901 has plenty of capacity to handle the current of the wrapper motor: [www.linemaster.com] Roger Re: renzetti rod wrapper
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: February 16, 2012 05:53PM Re: renzetti rod wrapper
Posted by:
Tom Kirkman
(Moderator)
Date: February 16, 2012 05:58PM
From what Lily told me this afternoon, the solid state foot control they were offering has been discontinued. They are looking for another supplier.
................ Re: renzetti rod wrapper
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: February 16, 2012 08:16PM
Tom,
If you have contact with renzetti, you might mention Linemaster. A very excellent industrial controller at a very reasonable price. Roger Re: renzetti rod wrapper
Posted by:
Tom Kirkman
(Moderator)
Date: February 16, 2012 08:27PM
Thanks, I'll mention it to Andy when I see him next week at the Expo.
............. Sorry, only registered users may post in this forum.
|