SPONSORS
2024 ICRBE EXPO |
Blank for verticaljigging
Posted by:
Christer Arnell
(194.54.28.---)
Date: February 14, 2012 01:10PM
Hi! This is my first post!
And i try to find a good blank for verticaljigging up to 30 gr (1 oz) it should be around 6 fot and be used for Pike and Swedish Walleye Any suggestions? / Christer Re: Blank for verticaljigging
Posted by:
Steven Paris
(---.dsl.louisacomm.net)
Date: February 14, 2012 02:43PM
Rainshadow XSW68MX and XSW62MX work great for vertical jigging up to a 1 oz jig for river walleyes. They are a bit longer than 6 ft. though.
steve Re: Blank for verticaljigging
Posted by:
Bill Pulk-Midwest rod and reel
(70.97.195.---)
Date: February 14, 2012 07:40PM
I WOULD GO A LONG WITH STEVEN...THE RX8 WALLEYE BLANKS WOULD BE GREAT FOR THE JOB...CHECK THE SPECS OUT HERE AT MIDWEST ROD AND REEL [midwestrodandreel.com] ...HOPE WE CAN HELP YOU OUT Bill@midwestrodandreel.com www.midwestrodandreel.com Re: Blank for verticaljigging
Posted by:
Christer Arnell
(194.54.28.---)
Date: February 15, 2012 12:25PM
Thanks for the suggestions and advice.
Is your view that the lure weight class is for low? Model Color Length Pcs Line Wt. Lure Wt. XSW68MX TC 6'8" 1 6-14lbs 1/8-5/8oz in my calculation 5/8 oz is about 18 gr (or Bad luck when I am thinking) /Christer Re: Blank for verticaljigging
Posted by:
Chuck Mills
(---.grenergy.com)
Date: February 15, 2012 12:45PM
Christer is Swedish Walleye same as Zander? The XSW68MX is a very powerful & fast blank, but for Pike and Zander with a one ounce lure you may want a little more rod. _________________________________________ "Angling is extremely time consuming. That's sort of the whole point." - Thomas McGuane Re: Blank for verticaljigging
Posted by:
Christer Arnell
(194.54.28.---)
Date: February 15, 2012 01:00PM
Yes, Zander is the German name ,and I am looking for a powerful and fast blank with an sensitive tip
where i can use jigheads up to about 1 ounce. /C Re: Blank for verticaljigging
Posted by:
Chuck Mills
(---.gctel.stellarllc.net)
Date: February 15, 2012 08:00PM
I guess any SJ (Spin Jig) or MB (Mag Bass) with a power rating of 3 would get you close. Most of those will be 6' 6" on the short end. We could recommend any number of blanks. What manufacturers are available in your location? _________________________________________ "Angling is extremely time consuming. That's sort of the whole point." - Thomas McGuane Re: Blank for verticaljigging
Posted by:
Christer Arnell
(194.54.28.---)
Date: February 16, 2012 11:42AM
In Germany and Europe most manufacturer are available,but in Sweden almost nothing,if you not are looking for flyblanks
/C Re: Blank for verticaljigging
Posted by:
Christer Arnell
(194.54.28.---)
Date: February 17, 2012 03:08PM
Thanks for the suggestions and advice.
/Christer Sorry, only registered users may post in this forum.
|