SPONSORS
2024 ICRBE EXPO |
surf rod
Posted by:
Wes Motsinger
(---.triad.res.rr.com)
Date: February 06, 2012 09:32PM
on surf rods from the foregrip to the blank it tapers down how do they do that? Re: surf rod
Posted by:
John Martines
(---.hsd1.pa.comcast.net)
Date: February 06, 2012 10:19PM
If we are talking cork tape and or shrink over cork tape the way I do it is build an epoxy ramp. I like to use Flex coat liquid epoxy glue which is harder to use then say U-40 paste type. It's not hard to do just takes some time to do it. The trick is to shape it and leave it alone to spin on the dryer (liquid stuff) You can also build it up with thread and then coat it with epoxy. Re: surf rod
Posted by:
Barry Thomas Sr
(---.hsd1.nj.comcast.net)
Date: February 07, 2012 06:53AM
Try here
[rodbuilding.org] Sorry, only registered users may post in this forum.
|