SPONSORS
2024 ICRBE EXPO |
epoxy cleaning?
Posted by:
lorenzo tellez
(---.hsd1.il.comcast.net)
Date: January 12, 2012 11:10AM
I finished some rods about 2 weeks ago, and i want to clean the rear grip and the butt cap, along with the section of rod with the epoxied wraps, will it be OK to do this, will it hurt the epoxy? Re: epoxy cleaning?
Posted by:
lorenzo tellez
(---.hsd1.il.comcast.net)
Date: January 12, 2012 11:27AM
forgot to pur, that I will be using that 90% alcohol. Re: epoxy cleaning?
Posted by:
Tom Kirkman
(Moderator)
Date: January 12, 2012 11:51AM
After that much time, it shouldn't.
............ Re: epoxy cleaning?
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: January 12, 2012 12:00PM
You can do a simple cleaning with Pledge the furniture wax Works well and easy to use Bill - willierods.com Re: epoxy cleaning?
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: January 12, 2012 12:08PM
Lorenzo,
Rather than using DNA, why don't you use something like Windex glass cleaner. You can even use 409 cleaner. Any of these home cleaning products do a great job of cleaning without any side effects of using a solvent on the rod. Good luck Roger Re: epoxy cleaning?
Posted by:
lorenzo tellez
(---.hsd1.il.comcast.net)
Date: January 12, 2012 12:46PM
thanks for the input, the epoxy feels pretty hard, it should to all right then. Sorry, only registered users may post in this forum.
|