I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Mitchell 300 Dimensions???
Posted by: Joel Smith (---.newton.k12.ga.us)
Date: January 04, 2012 04:58PM

Does anyone have a Mitchell 300? I have a rod for someone with this reel but he lives 1.5 hrs away and I can't find one in a store close by. If someone could take some measurements so that I could set up this rod using the NGC, it would save a lot of time. I couldn't make this guy understand what measurements I need nor does he have a micrometer to get precise measurements.
Thanks,

Joel

Options: ReplyQuote
Re: Mitchell 300 Dimensions???
Posted by: Joe Azar (---.sub-174-252-241.myvzw.com)
Date: January 04, 2012 05:29PM

Joel,
I have a couple of older 300's. Mitchell/Garcia
Email me the required dimensions and I'll send them to you.
azar1139@gmail.com

Always learning with
Ohio Rod Builders


Joe Azar

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster