SPONSORS
2024 ICRBE EXPO |
Blank color
Posted by:
Derek Mccarty
(---.bgk.bellsouth.net)
Date: December 04, 2011 03:24AM
What color is "naked" graphite? Re: Blank color
Posted by:
Phil Brenner
(198.217.64.---)
Date: December 04, 2011 03:35AM
think charcoal or very dark dark grey Re: Blank color
Posted by:
Derek Mccarty
(---.bgk.bellsouth.net)
Date: December 04, 2011 04:48AM
Thanks i thought it should be a grey color Re: Blank color
Posted by:
lorenzo tellez
(---.hsd1.il.comcast.net)
Date: December 04, 2011 09:26AM
it looks like the color of the pencil, I think those are made of graphite, I am not sure but I think i heard it was from somewhere, but it is the same color.I like them for the fact that they are harder to get a scratch on them, not that I want a scratch, but like the colore painted ones you have to be careful about scratching them, I know by experience. cause the first rod I built was painted and I sure did a good job of putting scratches on it, with the packing tool. I still am learning though. Re: Blank color
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: December 04, 2011 09:57AM
lorenzo
A quick coat of either permagloss or LumiSeal will stop that Very hard coating Bill - willierods.com Re: Blank color
Posted by:
Derek Mccarty
(---.mycingular.net)
Date: December 04, 2011 02:00PM
So do u need to put any kind of finish on those blanks? Re: Blank color
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: December 04, 2011 02:09PM
bare graphite will hold up very well Needs nothing and lighter Only if you want a different color on it Bill - willierods.com Re: Blank color
Posted by:
Derek Mccarty
(---.mycingular.net)
Date: December 04, 2011 02:21PM
That's what I was hoping to hear! Thanks! Re: Blank color
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: December 04, 2011 02:39PM
Plus it looks good with any color thread you want to use Bill - willierods.com Re: Blank color
Posted by:
Derek Mccarty
(---.bgk.bellsouth.net)
Date: December 04, 2011 07:00PM
Thanks guys im about to start on my first build and just wantin to get all the info a rookie can get!! Sorry, only registered users may post in this forum.
|